Differences Between an Inverter AC and a Non-inverter AC

Differences Between an Inverter AC and a Non-inverter AC
Photo by Mohamed_hassan on Pixabay

If you are planning to buy an AC (Air Conditioner) but need to know the exact one, this article about the differences between an inverter AC and a non-inverter AC is for you.  

There are two primary categories of air conditioners: inverter and non-inverter.

An inverter AC may alter its speed to match the desired temperature, but a non-inverter AC would maintain a constant speed.

As a result, an inverter air conditioner is more effective and can swiftly chill or heat a space. 

Additionally, because an inverter AC doesn’t have to work as hard to keep a steady temperature, it is less likely to sustain wear and tear.

Inverter air conditioners are, therefore, typically more expensive than their non-inverter equivalents.

However, many believe the longer-term decreased electricity costs and better efficiency justify the higher price. 

How Does An Inverter AC Work? 

The inverter air conditioner will draw air from within the space and expel it after chilling.

Compared to how an air cooler operates, which pulls air in from the outside and blows it within, this is quite the opposite.

Standard air conditioners are made to run at total capacity, which means they use more electricity while running. Inverter air conditioners utilize less electricity in comparison. 

Thus, inverter air conditioning serves as a catalyst. It modifies power usage depending on the required load to adjust and maintain air temperature.

Power usage is at its lowest when the desired and incoming air temperatures are identical.

An inverter air conditioner never turns the compressor off. Maintaining motor speed reduces the amount of electricity used. 

Due to the equipment’s inversion mechanism, the machine starts at a lower voltage. The rotors are not subjected to any additional load to do this.

Compared to conventional air conditioners, the compressor’s partial working capacity saves 30–50% electricity.

It is probably common knowledge that rooms come in a variety of sizes. Depending on the space size, there will be varied equivalent requirements for AC cargo. 

The inverter AC can adjust its speed depending on the required load capacity, thanks to its intrinsic design.

As a result, its load will be more adaptable to the size of the room in which it is put.

It changes the AC power delivered into it into DC electricity. This will assist in adjusting the input power’s frequency to alter the load on the air conditioner. 

How Does a Non-inverter Ac Work? 

A non-inverter air conditioner works by blowing cold air out of the unit and heating the surrounding area.

It does so by using a fan to circulate air through the system. A standard air conditioner uses a compressor to force air through the coils.

This process causes the refrigerant to expand and cool down. When the compressor stops, the cooling effect ends. 

The non-inverter AC also has a condenser coil. The condenser coil is where the refrigerant absorbs heat from the surrounding air.

Once cooled, the refrigerant moves through the evaporator coil. Here, the refrigerant releases heat back into the surrounding air. 

Differences Between an Inverter AC and a Non-inverter AC 

1. Cooling Speed 

Air conditioners using inverter technology provide faster and more effective cooling than those without.

We are already familiar with how an AC uses inverter technology. This is one of the significant differences between an inverter AC and a non-inverter AC.

The inverter AC initially consumes more power to chill the room before continuing to run at various speeds to keep the temperature stable.

In contrast to its rival, this provides precise temperature control, improving energy efficiency. 

2. Adaptability to Voltage Fluctuation 

A stabilizer is necessary for much electrical equipment, such as televisions, refrigerators, etc., to withstand voltage variations and safeguard them against power outages.

You do not require a stabilizer when using an air conditioner with inverter technology to protect your system.

The built-in technology empowers the system to handle voltage variations, aiding in its continuous, efficient operation. 

In contrast, a non-inverter air conditioner has problems starting, uses more energy when the voltage is low and could suffer damage. 

3. Energy Efficiency 

Energy efficiency is next on our list of differences between an inverter AC and a non-inverter AC. Compared to a traditional AC, an inverter AC is more energy-efficient.

Thanks to inverter technology, the compressor can operate consistently at different speeds, using less energy. 

A non-inverter AC, on the other hand, runs at full speed and uses the most power possible. As previously stated, employing inverter technology will save between 30% and 50% on your air conditioner’s electrical costs. 

The compressor starts up around 30% faster with an air conditioner that uses inverter technology than a regular AC, another benefit. Because the AC only needs it once, you can save energy on the start-up power here.

The non-inverter AC compressor needs start-up power frequently since it intermittently turns on and off. 

4. Eco Friendly 

We know that refrigerants or other cooling agents carry out an air conditioner’s cooling operation.

Most inverter air conditioners use hydrofluorocarbons, an environmentally benign refrigerant (HFCs).

These have little potential to contribute to global warming and no possibility of depleting the ozone layer. 

Most non-inverter air conditioners use hydrochlorofluorocarbons (HCFCs) as refrigerants, in contrast to inverter ACs.

Eco-friendliness is one of the differences between an inverter AC and a non-inverter AC.

The most widely used refrigerant, R-22, has a lower risk for ozone depletion but is still capable of causing global warming. Consequently, an inverter air conditioner is a green choice that is gaining popularity. 

5. Technology Difference 

An inverter AC is a more intelligent appliance than a non-inverter kind. Because of their clever trick, inverter air conditioners are significantly better at controlling temperature and can continue to operate long after the desired temperature has been reached.

The compressor motor modifies its power supply to meet what is needed rather than completely shutting off. Different principles apply to non-inverter air conditioners.

As the temperature in the room changes, they have to restart their compressor motor repeatedly after shutting it off.

This leads to significant wasteful electricity use. An inverter AC performs substantially better than a non-inverter sort in most situations. 

6. Noise Level 

Next on our list of differences between an inverter AC and a non-inverter AC is Noise Level.

Inverter ACs make much less noise than non-inverter types because they consume less power and perform more effectively.

Additionally, they turn on or off slowly, so they don’t make any more noise than they should. 

ACs without inverters can be very noisy. If you have one in your bedroom, its frequent turning on and off can be highly unpleasant. 

7. Air-filters 

Most non-inverter air conditioners on the market today have an air filter of average quality that needs to be cleaned frequently.

These filters cannot purify the air when they become clogged with dust or allergies. This limits the unit’s ability to cool. 

On the other hand, most air conditioners with inverter technology feature numerous filters, including HEPA, carbon, blue, and different types.

They are specifically made to prevent contaminants or allergies from entering the air. These filters clean the air and provide the room with cool, healthy air. 

8. Cost 

The cost of an AC might vary considerably. The primary factors that determine the air conditioner’s capacity, kind, and function.

Split ACs cost more than window units, split ACs have a higher power, and the process can relate to both inverter and non-inverter ACs.

ACs with inverters cost a little more than those without. However, inverter air conditioners consume far less electricity, lowering bills. 

If you compare an inverter AC to a window AC, you may spend more for the inverter AC itself but less for electricity. 

9. Durability 

Durability is last on our list of differences between an inverter AC and a non-inverter AC.

Because the compressor runs smoothly, an inverter air conditioner lasts longer than its competitor.

There are also no fluctuations, as all of us previously discovered. Thus, an inverter AC has a far longer lifespan than a non-inverter system, subject to frequent changes. 

So you have a few options for purchasing an air conditioner. One of them entails purchasing an inverter or non-inverter type of air conditioner.

Now, when non-inverter types are less expensive, people tend to favor them. They ultimately prove to be less effective and efficient than inverter models.

Inverter air conditioners can cost more upfront than other types, but you should always consider how much money you will save in the long term. 

We advise investing in an inverter air conditioner if you have additional cash. 

Leave a Reply

Your email address will not be published. Required fields are marked *

You May Also Like